Stretchable and Sweat-Wicking Patch for Skin-Attached Colorimetric Analysis of Sweat Biomarkers.

Stretchable sweat sensors are promising technology that can acquire biomolecular insights for health and fitness monitoring by intimate integration with the body. However, current sensors often require microfabricated microfluidic channels to control sweat flow during lab-on-body analysis, which makes effective and affordable sweat sampling a significant practical challenge. Here, we present stretchable and sweat-wicking patches that utilize bioinspired smart wettable membranes for the on-demand manipulation of sweat flow. In a scalable process, the membrane is created by stacking hydrophobic elastomer nanofibers onto soft microfoams with predefined two-dimensional superhydrophobic and superhydrophilic patterns. The engineered heterogeneous wettability distribution allows these porous membranes to achieve enhanced extraction and selective collection of sweat in embedded assays. Despite the simplified architecture, the color reactions between sweat and chemical indicators are inhibited from directly contacting the skin to achieve a largely improved operation safety. The sensing patches can simultaneously quantify pH, urea, and calcium in sweat through digital colorimetric analysis with smartphone images. The construction with all compliant materials renders these patches soft and stretchy to achieve conformal attachment to the skin. Successfully analyzing sweat compositions after physical exercises illustrates the practical suitability of these skin-attachable sensors for health tracking and point-of-care diagnosis.

Rapid and easily identifiable blood typing on microfluidic cotton thread-based analytical devices.

In this study, we present a novel swing-elution-based method to achieve rapid, cost-effective, and easily identifiable blood typing assays. Specifically, the method aims to swing the microfluidic cotton thread-based analytical devices (µCTADs) in PBS solution to effectively elute free red blood cells (RBCs) and allow large agglutinated RBCs to remain to precisely determine the blood type. In order to ensure an easily identifiable blood typing assay, fast swing mode needs to be used, and the elution time is evaluated to be >50 seconds. The created µCTADs have been used to successfully classify ABO and RhD blood types in 56 blood samples. Finally, in order to enhance the convenience and portability of blood typing, a blood-typing chip that utilizes a PBS liquid bridge to effectively elute the free RBCs is designed and fabricated based on the above swing-elution principle. Compared with the traditional wicking-elution methods that rely on the wicking effect to weakly elute the RBCs, our method possesses a stronger elution effect to remove the free RBCs inside the inter-fiber gaps or adhered to the fiber surface, resulting in effectively enhancing the identifiability of the elution results and minimizing user interpretation error. Given the simplicity of the blood typing method, we believe that our blood typing method has great potential to be widely applied in resource-limited and developing regions.

Liquid-liquid phase separation within fibrillar networks.

Complex fibrillar networks mediate liquid-liquid phase separation of biomolecular condensates within the cell. Mechanical interactions between these condensates and the surrounding networks are increasingly implicated in the physiology of the condensates and yet, the physical principles underlying phase separation within intracellular media remain poorly understood. Here, we elucidate the dynamics and mechanics of liquid-liquid phase separation within fibrillar networks by condensing oil droplets within biopolymer gels. We find that condensates constrained within the network pore space grow in abrupt temporal bursts. The subsequent restructuring of condensates and concomitant network deformation is contingent on the fracture of network fibrils, which is determined by a competition between condensate capillarity and network strength. As a synthetic analog to intracellular phase separation, these results further our understanding of the mechanical interactions between biomolecular condensates and fibrillar networks in the cell.

Photothermal Janus fabrics enabling persistent directional sweat-wicking in personal wet-thermal management.

Directional sweat-wicking by Janus fabrics has gained substantial attention in promoting personal wet-thermal management for optimal human comfort. During intense physical exercise, excessive sweating can cause the flooding of fabrics and weaken their wicking capabilities once the inner capillary channels are saturated. To address this issue, we develop a photothermal Janus fabric through a facile polydopamine (PDA) deposition followed by single-sided spray-coating of hydrophobic polydimethylsiloxane (PDMS). Such innovative fabrics enable directional sweat-wicking through a Janus structure and persistent removal of excessive sweat by solar-powered evaporation. Under sunlight, our photothermal Janus fabrics exhibit an enhanced evaporation rate, approximately twice compared with that of conventional Janus fabrics (∼1.143 ± 0.027 kg m-2h-1), making them suitable for high sweating rates during vigorous exercise. Furthermore, these fabrics help to maintain the skin temperature within the normal range, preventing hypothermia caused by profuse sweating. In addition, our photothermal Janus fabrics exhibit excellent washing durability even after multiple washing cycles, ensuring prolonged performance and safety.

Exo I signal amplification of a DNA hydrogel film combined with capillary self-driven action for EpCAM detection.

Target-responsive aptamer hydrogels are increasingly used in the field of analytical sensing with different morphologies developed by various strategies. Herein, we developed a DNA hydrogel film combined with capillary self-driven action for the specific detection of the tumor marker EpCAM and further introduced Exo I for signal amplification. EpCAM aptamer was used as a crosslinking agent to construct the DNA hydrogel film. When EpCAM was present, it competed for binding with the EpCAM aptamer, resulting in a permeability change of the DNA hydrogel film attached to one end of the capillary, and leading to different solution flow rates through the capillaries that can be utilized for the quantitative detection of EpCAM. This method did not require any instrument and was easy to use. The distance the solution travelled through the capillary was quantified as the concentration of EpCAM, and only a small amount of DNA hydrogel was required for each detection. The detection limit of EpCAM was as low as 0.018 ng mL-1, while offering the advantages of good stability and specificity, and showing great potential in point-of-care testing.

Graphene Hollow Micropatterns via Capillarity-Driven Assembly for Drug Storage and Neural Cell Alignment.

Electrical conductivity, cell-guided surface topology, and drug storage capacity of biomaterials are attractive properties for the repair and regeneration of anisotropic tissues with electrical sensitivity, such as nerves. However, designing and fabricating implantable biomaterials with all these functions remain challenging. Herein, we developed a freestanding graphene substrate with micropatterned surfaces by a simple templating method. Importantly, the raised surface micropatterns had an internal hollow structure. The morphology results showed that the template microgroove width and the graphene nanosheet size were important indicators of the formation of the hollow structures. Through real-time monitoring and theoretical analysis of the formation process, it was found that the main formation mechanism was the delamination and interlayer movement of the graphene nanosheets triggered by the evaporation-induced capillary force. Finally, we achieved the controlled release of loaded microparticles and promoted the orientation of rat dorsal root ganglion neurons by applying an electric field to the hollow micropatterns. This capillarity-induced self-assembly strategy paves the way for the development of high-performance graphene micropatterned films with a hollow structure that have potential for clinical application in the repair of nerve injury.

Polymorphic display and texture integrated systems controlled by capillarity.

Soft robotics offer unusual bioinspired solutions to challenging engineering problems. Colorful display and morphing appendages are vital signaling modalities used by natural creatures to camouflage, attract mates, or deter predators. Engineering these display capabilities using traditional light emitting devices is energy expensive and bulky and requires rigid substrates. Here, we use capillary-controlled robotic flapping fins to create switchable visual contrast and produce state-persistent, multipixel displays that are 1000- and 10-fold more energy efficient than light emitting devices and electronic paper, respectively. We reveal the bimorphic ability of these fins, whereby they switch between straight or bent stable equilibria. By controlling the droplets temperature across the fins, the multifunctional cells simultaneously exhibit infrared signals decoupled from the optical signals for multispectral display. The ultralow power, scalability, and mechanical compliance make them suitable for curvilinear and soft machines.

Rapid, sensitive detection of PFOA with smartphone-based flow rate analysis utilizing competitive molecular interactions during capillary action.

Perfluorinated-alkyl substances (PFAS) pose an unmet threat to the public because they are not strictly monitored and regulated. Perfluorinated-carbon alkyl chains (PFOA), a type of PFAS, at 70 fg/µL is the current health and safety recommendation. Current testing methods for PFOA and PFAS chemicals include HPLC-MS/MS and molecularly imprinted polymers, which are expensive, time-consuming, and require training. In this work, PFOA and PFOS detection was performed on a paper microfluidic chip using competitive interactions between PFOA/PFOS, cellulose fibers, and various reagents (L-lysine, casein, and albumin). Such interactions altered the surface tension at the wetting front and, subsequently, the capillary flow rate. A smartphone captured the videos of this capillary action. The samples flowed through the channel in less than 2 min. Albumin worked the best in detecting PFOA, followed by casein. The detection limit was 10 ag/µL in DI water and 1 fg/µL in effluent (processed) wastewater. Specificity to other non-fluorocarbon surfactants was also tested, using anionic sodium dodecyl sulfate (SDS), non-ionic Tween 20, and cationic cetrimonium bromide (CTAB). A combination of the reagents successfully distinguished PFOA from all three surfactants at 100% accuracy. This low-cost, handheld assay can be an accessible alternative for rapid in situ estimation of PFOA concentration.

Enhanced Capillary Wicking through Hierarchically Porous Constructs Derived from Bijel Templates.

Liquid capillarity through porous media can be enhanced by a rational design of hierarchically porous constructs that suggest sufficiently large liquid pathways from an upper-level hierarchy as well as capillary pressure enabled by a lower hierarchy. Here, we demonstrate a material design strategy utilizing a new class of self-assembled soft materials, called bicontinuous interfacially jammed emulsion gels (bijels), to produce hierarchically porous copper, which enables the unique combination of unprecedented control over both macropores and mesopores in a regular, uniform, and continuous arrangement. The dynamic droplet topologies on the hierarchically copper pores prove the significant enhancement in liquid capillarity compared to homogeneous porous structures. The role of nanoscale morphology in liquid infiltration is further investigated through environmental scanning electron microscopy, in which wetting through the mesopores occurs at the beginning, followed by liquid transport through macropores. This understanding on capillary wicking will allow us to design better hierarchically porous media that can address performance breakthroughs in interfacial applications, ranging from battery electrodes, cell delivery in biomedical devices, to capillary-fed thermal management systems.

The effect of the digital printing of fabric on the morphology of passive bloodstains.

Bloodstained fabrics found at crime scenes are likely to have had processing treatments, such as dyeing or printing, but the effect of the treatments on bloodstain morphology is not always considered. In order to study the effect of digital printing on bloodstain morphology, drip stains were created from five impact velocities (1.9-5.4 ms-1) on three different mass per unit areas (88-226 g/m²) of 100% cotton calico which had been digitally printed using reactive dye. Across all three printed fabrics, the bloodstains appeared visually similar, and no correlation was found between the dry bloodstain area and the impact velocity. When comparing the bloodstains on the printed fabric to those which had been created previously on the same fabric in a dyed and not-coloured state, the dry bloodstains on the printed fabric were statistically significantly larger (e.g. for the calico with the lightest mass per unit area, mean dry bloodstain area was 126.6, 64.4 and 44.3 mm² for the printed, dyed and not-coloured fabrics respectively). Examination of the larger bloodstains on the printed calico with the micro computed tomography scanner and scanning electron microscope, suggested that the printing process increased the wettability of the fabric, so the blood could spread more easily on the surface. This allowed the blood to coat the yarns, and wick into them before wicking along the intra-yarn spaces. The results presented in this paper showed that care must be taken when examining bloodstains at crime scenes. Depending on the fabric and the processing of the fabric the size of the blood stains may not increase with impact velocity as wicking may result in a larger bloodstain from a lower velocity. The bloodstain on the penetrated face of the fabric may be larger than on the impacted face and the same fabrics with different processing will produce different blood stain sizes and shapes.

Biomimetic Patch with Wicking-Breathable and Multi-mechanism Adhesion for Bioelectrical Signal Monitoring.

Wearable bioelectrical monitoring devices can provide long-term human health information such as electrocardiogram and other physiological signals. It is a crucial part of the remote medical system. These can provide prediction for the diagnosis and treatment of cardiovascular disease and access to timely treatment. However, the patch comfort of the wearable monitoring devices in long-term contact with the skin have been a technical bottleneck of the hardware. In this study, the biomimetic patch with wicking-breathable and multi-mechanism adhesion performance to achieve adaptability and comfortability to human skin has been reported. The patch was designed based on a conical through-hole and hexagonal microgroove to directionally transport sweat from skin to air which gives the patch the breathable performance. The breathable and drainage capability of the biomimetic patch was experimentally verified by analyzing the conical through-hole and hexagonal microgroove with the structural mechanism of wicking. Multi-mechanism adhesion of the Ag/Ni microneedle array and PDMS-t adhesion material ensures the stability of patch signal acquisition. This study provides a new way for enhancing the breathability and adaptability of the patch to realize accurate bioelectrical signal monitoring under sweat conditions on human skin.

Perspiration-Wicking and Luminescent On-Skin Electronics Based on Ultrastretchable Janus E-Textiles.

Stretchable electronics have attracted surging attention for next-generation smart wearables, yet traditional flexible devices fabricated on hermetical elastic substrates cannot satisfy lengthy wearing comfort and signal stability due to their poor moisture and air permeability. Herein, perspiration-wicking and luminescent on-skin electrodes are fabricated on superelastic nonwoven textiles with a Janus configuration. Through the electrospin-assisted face-to-face assembly of all-SEBS microfibers with differentiated diameters and composition, porosity and wettability asymmetry are constructed across the textile, endowing it with antigravity water transport capability for continuous sweat release. Also, the phosphor particles evenly encapsulated in the elastic fibers empower the Janus textile with stable light-emitting capability under extreme stretching in a dark environment. Additionally, the precise printing of highly conductive liquid metal (LM) circuits onto the matrix not only equips the electronic textile with broad detectability for various biophysical and electrophysiological signals but also enables successful implementation of human-machine interface (HMIs) to control a mechanical claw.

Wicking through complex interfaces at interlacing yarns.

HYPOTHESIS: Wicking flow in the wale direction of knit fabrics is slowed by capillary pressure minima during the transition at yarn contacts. The characteristic pore structure of yarns leads to an unfavorable free energy evolution and is the cause of these minima. EXPERIMENTS: Time-resolved synchrotron tomographic microscopy is employed to study the evolution of water configuration during wicking flow in interlacing yarns. Dynamic pore network modeling is used based on the obtained image data and distributions of delay times for pore intrusion. Good agreement is observed by comparison to the experimental data. FINDINGS: Yarn-to-yarn transition is found to coincide with slow water advance in a thin interface zone at the yarn contact. The pore spaces of the two yarns merge within this interface zone and provide a transition path. A deep capillary pressure minimum occurs while water passes through the center of the interface zone, effectively delaying the wicking flow. A pore network model considering pore intrusion delay times is expanded to include inter-yarn wicking and reproduce the observed wicking dynamics.

Hairy surfaces by cold drawing leading to dense lawns of high aspect ratio hairs.

The surfaces of many organisms are covered with hairs, which are essential for their survival in a complex environment. The generation of artificial hairy surfaces from polymer materials has proven to be challenging as it requires the generation of structures with very high aspect ratios (AR). We report on a technique for the fabrication of surfaces covered with dense layers of very high AR nanoscale polymer hairs. To this, templates having pores with diameters of several hundred nanometers are filled with a polymer melt by capillary action. The polymer is then allowed to cool and the template is mechanically removed. Depending on the conditions employed, the formed structures can be a simple replica of the pore, or the polymer is deformed very strongly by cold drawing to yield in long hairs, with hair densities significantly up to 6,6 × 108 hairs/cm2 at AR of much higher than 200. The mechanism of hair formation is attributed to a delicate balance between the adhesion forces of the polymer in the pore and the yield force acting on it during mechanically demolding. We demonstrate how with very little effort and within a timescale of seconds unique topographies can be obtained, which can dramatically tailor the wetting properties of common polymers.

Wicking dynamics in yarns.

The spontaneous imbibition of a liquid within porous media, known as wicking, can display uncommon features in textiles and yarns. Yarns exhibited step-wise wicking dynamics not captured by current models. HYPOTHESIS: Wicking dynamics in yarns not only depend on inter-fiber pore filling, but are mainly determined by the pore-to-pore transition processes and the structure of the pore network. EXPERIMENTS: Fast X-ray tomographic microscopy is employed to reveal the pore scale processes and neutron radiography for the macroscopic water uptake in yarns. A semi-empirical pore network model is presented that employs the measured pore network topology and pore scale dynamics to reproduce the experimentally observed wicking dynamics in yarns. FINDINGS: The yarn pore system is a sparse network of long and narrow pores that promotes step-wise uptake dynamics. Wicking in yarns displays fast pore filling events in the order of seconds and long waiting times between filling events up to several minutes while navigating the pore network. As main result, we find that a few filling events directly determine the macroscopic behavior of wicking in the sparse pore network of yarns. It is necessary to consider pore-to-pore transition waiting times and the pore network structure to explain the characteristics of wicking dynamics in yarns.

Caged-Sphere Optofluidic Sensors: Whispering Gallery Resonators in Wicking Microfluidics.

The rapid development of optofluidic technologies in recent years has seen the need for sensing platforms with ease-of-use, simple sample manipulation, and high performance and sensitivity. Herein, an integrated optofluidic sensor consisting of a pillar array-based open microfluidic chip and caged dye-doped whispering gallery mode microspheres is demonstrated and shown to have potential for simple real-time monitoring of liquids. The open microfluidic chip allows for the wicking of a thin film of liquid across an open surface with subsequent evaporation-driven flow enabling continuous passive flow for sampling. The active dye-doped whispering gallery mode microspheres placed between pillars, avoid the use of cumbersome fibre tapers to couple light to the resonators as is required for passive microspheres. The performance of this integrated sensor is demonstrated using glucose solutions (0.05-0.3 g/mL) and the sensor response is shown to be dynamic and reversible. The sensor achieves a refractive index sensitivity of ~40 nm/RIU, with Q-factors of ~5 × 103 indicating a detection limit of ~3 × 10-3 RIU (~20 mg/mL glucose). Further enhancement of the detection limit is expected by increasing the microsphere Q-factor using high-index materials for the resonators, or alternatively, inducing lasing. The integrated sensors are expected to have significant potential for a host of downstream applications, particularly relating to point-of-care diagnostics.

Revealing Capillarity in AFM Indentation of Cells by Nanodiamond-Based Nonlocal Deformation Sensing.

Nanoindentation based on atomic force microscopy (AFM) can measure the elasticity of biomaterials and cells with high spatial resolution and sensitivity, but relating the data to quantitative mechanical properties depends on information on the local contact, which is unclear in most cases. Here, we demonstrate nonlocal deformation sensing on biorelevant soft matters upon AFM indentation by using nitrogen-vacancy centers in nanodiamonds, providing data for studying both the elasticity and capillarity without requiring detailed knowledge about the local contact. Using fixed HeLa cells for demonstration, we show that the apparent elastic moduli of the cells would have been overestimated if the capillarity was not considered. In addition, we observe that both the elastic moduli and the surface tensions are reduced after depolymerization of the actin cytoskeleton in cells. This work demonstrates that the nanodiamond sensing of nonlocal deformation with nanometer precision is particularly suitable for studying mechanics of soft biorelevant materials.

The effect of reactive dyeing of fabric on the morphology of passive bloodstains.

The majority of fabrics at crime scenes have been coloured in some way. The effect of such treatments on resultant bloodstains has not been considered. In this work, horse blood was dropped onto reactively dyed calico fabrics (100% cotton, plain woven) with three different masses of 91 g m-², 171 g m-² and 243 g m-² and the results compared to previous work on the not-coloured calico fabric. Five impact velocities were used from 1.7 ms-1 to 5.4 ms-1. The use of reactive dye increased the thickness (from 0.38 - 0.56 mm to 0.39 - 0.6 mm) and mass per unit area (from 85.1 - 224.6 g/m² to 91 - 243 g/m²) of the calico fabrics. The reactively dyed fabrics had larger bloodstains (e.g. lightest calico 41.2 - 78.6 mm²) compares to the not-coloured fabrics (e.g. lightest calico 21.4 - 67.5 mm²) across all three mass per unit areas. The dyeing of the fabrics altered the intra-yarn spaces to a more optimum size for wicking blood, increasing the ease with which the blood could wick along the yarns in the dyed calico. The amount of wicking varied depending on individual variations within the fabrics and yarns. More variation in dry bloodstain area was seen among dyed calico specimens than for the not-coloured fabric. The amount of wicking which was seen on the dyed calico meant there was no correlation between dry bloodstain area and impact velocity, a correlation which was seen on the medium and heavy not-coloured calico in the previous work.

Hydrodynamics of electro-capillarity propelled non-Newtonian droplets through micro-confinements.

In this article, we theoretically explore the dynamics of droplet motion and its evolution during electro-capillarity propelled actuation within microfluidic systems. The study covers a wide gamut of fluids, wherein we investigate the dynamics of both pseudoplastic and dilatant fluid droplets. It is observed that change in the fluid rheology of the non-Newtonian fluids leads to significant morphing of the droplet dynamics during the actuation and propulsion event when compared to the Newtonian counterparts. We validate the theory using experimental reports on similar systems employing Newtonian droplets. The influence of governing parameters such as the actuation voltage and its transients, dielectric layer thickness on the electrodes and electrode spacing is probed. We also explore the influence of the interfacial properties of the system, such as channel wall friction, droplet wettability, and capillary friction, and establish that the fluid rheology, in conjunction with the interfacial features regulate the electro-actuation and propulsion of the droplets. We further provide theoretical estimates on the optimal design of the electro-actuation system in terms of a proposed electro-interfacial tension parameter. The findings may hold significance towards design and development of microfluidics with electro-actuation systems.

Development of a Photonic Switch via Electro-Capillarity-Induced Water Penetration Across a 10-nm Gap.

With narrow and dense nanoarchitectures increasingly adopted to improve optical functionality, achieving the complete wetting of photonic devices is required when aiming at underwater molecule detection over the water-repellent optical materials. Despite continuous advances in photonic applications, real-time monitoring of nanoscale wetting transitions across nanostructures with 10-nm gaps, the distance at which photonic performance is maximized, remains a chronic hurdle when attempting to quantify the water influx and molecules therein. For this reason, the present study develops a photonic switch that transforms the wetting transition into perceivable color changes using a liquid-permeable Fabry-Perot resonator. Electro-capillary-induced Cassie-to-Wenzel transitions produce an optical memory effect in the photonic switch, as confirmed by surface-energy analysis, simulations, and an experimental demonstration. The results show that controlling the wetting behavior using the proposed photonic switch is a promising strategy for the integration of aqueous media with photonic hotspots in plasmonic nanostructures such as biochemical sensors.